Refrigerator repairs can be expensive, so it is a good idea to perform some regular maintenance to keep your fridge running smoothly. Simple cleaning tools such as a vacuum cleaner and soft, damp cloths are all you will need to avoid refrigerator repairs queens.
Clean the Coils
The condenser coils are usually located on the bottom of the refrigerator, although they used to be found at the back. It is necessary to clean the coils because dirt and hair stick to them and this puts a greater load on your fridge’s condenser. A regular cleaning not only keeps the appliance running well, but it will also save money. Remove the grill at the bottom of the until and gently vacuum off any hair or debris, then replace the grill.
Clean the Fan
While you are vacuuming the coils, wipe off the condenser fan. This is found at the back, so you will probably need to slide the fridge out from the wall. This is also a good time to empty the drip pan at the bottom of the fridge. Don’t forget to unplug the unit before working on it.
Wipe off the Door Gasket
One of the simplest things to do can make a huge difference. From spilled soda to dribbled jelly, wiping down the gasket around the refrigerator door to remove stickiness that could cause the gasket to stick to the door and tear. Replacing a gasket is a very expensive repair.
Keep Freezer Vents Clear
Keeping the freezer vents unobstructed helps with air circulation. Cleaning the vents keeps crumbs and small debris from clogging them or falling into the fan and causing problems. Don’t pack the freezer full of food because this prevents air circulation.
Check the Temperature
Use a thermometer to check the fridge’s temperature from time to time. The refrigerator compartment should be between 38 and 42 degrees F and the freezer between 0 and 10 degrees F.
Taking a few moments to do some maintenance will keep your fridge running trouble free.
